LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Starting System) >> Starter Motor Relay >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Motor Relay: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.

The starter relay is located in the Fuse/Relay Block. The Fuse/Relay Block is located under, and to the left side of the drivers seat. See Fuse/Relay Block cover for relay identification and location, or refer to Figure.

  1. Install relay into Fuse/Relay Block.
  2. Install cover to side of Fuse/Relay Block (snaps on).
scientia non olet · About LEMON Manuals