LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Battery System) >> Battery Tray >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Battery Tray: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the battery tray. (Refer to ELECTRICAL/BATTERY SYSTEM - CLEANING) .
  2. Position the battery tray onto the battery tray support.
  3. Install and tighten the bolts that secure the battery tray to the battery tray support. Tighten the screws to 11.8 N.m (105 in. lbs.).
  4. Install the battery temperature sensor onto the battery tray, if equipped.
  5. Install the battery onto the battery tray. (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - INSTALLATION) .
scientia non olet · About LEMON Manuals