LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Limited, 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Fuel Injection >> Map Sensor >> Installation >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Map Sensor: Installation: Notes

Fig 1: Locating Manifold Absolute Presure Sensor
GC0032353Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the MAP sensor.
  2. Install the bolt (1).
  3. Connect the Manifold Absolute Pressure (MAP) harness connector.
  4. Install the engine cover. Align the engine cover retaining clips to the rubber mounts, and push down firmly to connect engine cover to rubber mounts.
    NOTE: To ease the installation of the engine cover, apply a small amount of lubricant to the engine cover rubber mounts.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals