LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Limited, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Cooling System) >> Engine >> Engine Block Heater >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Block Heater: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Screw the block heater into the core hole. See Figure.
  2. Route the heater wiring harness away from and interference and secure with wiring tie straps.
  3. Refill the cooling system.
  4. Connect the negative battery cable.
  5. Start the engine and inspect for leaks.
scientia non olet · About LEMON Manuals