LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire SRT-6, 2D Convertible >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Fuel Injection >> O2 Sensor >> Installation >> Installation - Downstream O2
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation - Downstream O2

Fig 1: Removing/Installing Downstream O2 Sensor
GC0032361Courtesy of DAIMLERCHRYSLER CORP.
  1. Apply anti-seize compound to the threaded portion of the O2 sensor.
  2. Install the O2 sensor (1). Tighten to 50 N.m (37 ft. lbs.).
  3. Connect the O2 sensor harness connector.
  4. Lower the vehicle.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals