LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection (Except Diesel) >> Accelerator Pedal >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Accelerator Pedal: Installation

Fig 1: Accelerator Pedal And Throttle Cable
GC0021652Courtesy of DAIMLERCHRYSLER CORP.
  1. Position accelerator pedal assembly on dash panel. Install retaining nuts. Tighten retaining nuts to 12 N.m (105 in. lbs.) torque.
  2. Place cable through slot in top of pedal shaft.
  3. While holding pedal lever, Push retainer clip forward in vehicle engaging it into the pedal lever.
  4. Hold the throttle body lever in the wide open position and install the throttle cable.
scientia non olet · About LEMON Manuals