LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Satellite Acceleration Sensor - Pt27 >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Satellite Acceleration Sensor - Pt27: Removal

Fig 1: Satellite Acceleration Sensor - Remove/Install
GC0023018Courtesy of DAIMLERCHRYSLER CORP.
  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  3. Remove the lower quarter trim from the appropriate side of the vehicle.
  4. Disconnect the Satellite Acceleration Sensor (SAS) electrical connector (2).
  5. Remove the SAS retaining screws (1) and remove the sensor (5) from the vehicle (3).