Modular Clutch: Removal

Fig 1: Modular Clutch Assembly - Typical

Courtesy of DAIMLERCHRYSLER CORP.

1 - MODULAR CLUTCH ASSEMBLY

2 - CLIP

3 - TRANSAXLE

4 - CLUTCH TO DRIVE PLATE BOLTS (4)

Remove transaxle,
- For G288 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL) .
- For T350 M/T, (Refer to TRANSMISSION/TRANSAXLE/MANUAL - REMOVAL) .
Remove modular clutch assembly (1) from transaxle input shaft. See Fig 1.

Fig 2: Pressure Plate -To- Flywheel Bolts - Turbo
Courtesy of DAIMLERCHRYSLER CORP.

1 - BOLT (6)

2 - PRESSURE PLATE

3 - DOWEL
2.4L Turbo models: Disassemble modular clutch assembly. Remove six pressure plate-to-flywheel bolts (1). See Fig 2. Remove pressure plate (2) and disc from flywheel.