LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Interior/Exterior) >> DECKLID/Liftgate >> Hinge >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Section 106 (Interior/Exterior): DECKLID/Liftgate: Hinge: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position decklid hinge on vehicle.
  2. Position any shims retrieved during removal between the hinge and the trunk pad. Install bolts attaching hinge to trunk pan and tighten to 28 N.m (21 ft. lbs.).
  3. Loosely install bolts attaching the hinge to the decklid.
  4. Align the hinge marks made on the decklid.
  5. Tighten the bolts attaching hinge to the decklid to 28 N.m (21 ft. lbs.).
  6. Verify decklid operation and alignment and adjust if necessary. (Refer to BODY/BODY STRUCTURE/GAP AND FLUSH - SPECIFICATIONS) 
  7. Install splash shields.
  8. Install rear wheels and tighten to specified torque. (Refer to TIRES/WHEELS - INSTALLATION) .
scientia non olet · About LEMON Manuals