Section 106 (Interior/Exterior): DECKLID/Liftgate: Latch: Installation
WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
- Position latch to vehicle.
- Loosely install bolts attaching latch to decklid.
- Using previously made marks, align decklid latch to outline on decklid.
- Tighten bolts attaching decklid latch to decklid to 12 N.m (9 ft. lbs.).
- Install the lock cylinder bracket and install the three screws.
- Verify decklid operation and alignment and adjust if necessary. (Refer to BODY/BODY STRUCTURE/GAP AND FLUSH - SPECIFICATIONS)