Section 106 (Interior/Exterior): DECKLID/Liftgate: Latch: Removal
WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the three screws and remove the key cylinder cable bracket. See Fig 1
- Using a grease pencil or equivalent, lightly mark the outline of the latch on decklid to assist installation.
- Remove bolts attaching latch to decklid. See Fig 2.
- Remove latch from vehicle.
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - BRACKET |
| 2 - SCREWS (3) |
Courtesy of DAIMLERCHRYSLER CORP.
| 1 - WIRE HARNESS |
| 2 - PUSH PIN |
| 3 - DECKLID |
| 4 - DECKLID LATCH CABLE ASSEMBLY |
| 5 - LOCK CYLINDER CABLE BRACKET |