Replacing With New Sensor
WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
The camshaft position sensor is located on the timing chain case above the water pump and under the throttle body. See Figure.
If a new replacement camshaft position sensor is to be installed, use this procedure.
- Disconnect the sensor wiring harness connector from sensor.
- Remove the sensor mounting bolt.
- Carefully pry the sensor from the timing chain case/cover in a rocking action with two small screwdrivers.
- Remove the sensor from vehicle.