Glow Plug: Removal
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the engine cover.
- Use special tool #9286 pliers to unplug the glow plug wiring harness connector(s) at the glow plug.
- Remove the glow plug(s). See Fig 1.
| 1 - GLOW PLUG |
| 2 - WIRING HARNESS CONNECTOR |
| 3 - INTAKE MANIFOLD |
| 4 - ENGINE COVER |