LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Vehicle Theft Security System (Service Information)) >> Sentry Key Remote Entry Module >> Removal >> Removal - Sentry Key Remote Entry Module
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal - Sentry Key Remote Entry Module

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying SKREEM Harness Connectors
GC0033562Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the instrument cluster to gain access to the SKREEM module. (Refer to ELECTRICAL/INSTRUMENT CLUSTER - REMOVAL) .
  3. Disconnect the 2-pin CAN bus connector and the 18-pin electrical connector (1) from the SKREEM.
  4. Disconnect the 2-pin connector for the sentry key antenna ring.
  5. Press the retaining tabs apart.
  6. Remove the SKREEM from the base plate.
scientia non olet · About LEMON Manuals