LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Exhaust System) >> Support Bracket And Isolator >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Support Bracket And Isolator: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Bracket Bolt, Bracket & Isolator From Exhaust Hanger
GC0032298Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the bracket and bolt on the vehicle.
  2. Tighten the bolt to 20 N.m (15 ft. lbs.).
  3. Install the isolator and hanger.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals