Air Pump: Installation: Notes

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Air Pump, Bracket & Retaining Bolt (3.2L)

Courtesy of DAIMLERCHRYSLER CORP.

Position the air pump (1) into the air pump retaining bracket (3).
Install the air pump retaining bolt (2). Tighten bolt to 20 N.m (177 in. lbs.).

Fig 2: Connecting Switchover Tube & Harness Connector (3.2L)
Courtesy of DAIMLERCHRYSLER CORP.
Connect the air pump harness connector (2).
Connect the air pump switchover tube (1).
Install the air cleaner housing.
Connect the negative battery cable.