LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Emissions Control System) >> Air Injection >> Switchover Valve >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Switchover Valve: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Switchover Valve
GC0033627Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the new gasket between intake manifold and air pump switchover valve (1).
  2. Install the retaining bolt (4). Tighten bolt to 20 N.m (177 in. lbs.).
  3. Connect the vacuum line (3).
  4. Connect the air pump switchover tube (2).
  5. Install the air cleaner housing.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals