Remote Keyless Entry

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.

The Remote Keyless Entry transmitter has four buttons for operation. They are UNLOCK, LOCK, PANIC, and IGNITION KEY RELEASE. Both the Lock and Unlock buttons have embossed ISO symbols. The Remote Keyless Entry transmitter has the ability to toggle the system between a Global mode or a Selective mode. (Refer to ELECTRICAL/POWER LOCKS - STANDARD PROCEDURE) . The Unlock button when pressed will unlock the doors, rear liftgate and fuel door, and flash the turn signal lamps one time to indicate the vehicle is unlocked. The Lock button when pressed will lock the doors, rear liftgate and fuel door, and flash the turn signal lamps three times to indicate the vehicle is locked. If the lamps do not flash during locking, a door or the rear liftgate is not closed properly. The Panic button when pressed for at least one second will cause the exterior lamps to flash and a panic alarm to sound for three minutes. To deactivate, press the Panic button a second time or turn the ignition switch to the ON/RUN position. The Ignition Key Release button allows the key blade in the Remote Keyless Entry transmitter to flip open from the stored position.

The Sentry Key Remote Entry Module (SKREEM) transceiver is capable of retaining an access code even when power is removed. The module retains in memory the ID numbers of any Ignition Key transponder that is programmed into it. For added system security, each SKREEM is programmed with a unique secret key code. Additional and/or replacement keys can be obtained only from a Chrysler dealer.