Steering Angle Sensor: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Alignment Points On Component Housing

Courtesy of DAIMLERCHRYSLER CORP.

Locate and align the alignment points on the component housings (1).
Install the steering angle sensor to the clockspring.

Fig 2: Identifying Retension Tabs
Courtesy of DAIMLERCHRYSLER CORP.
Snap the steering angle sensor retaining tabs (1) onto the clockspring.

Fig 3: Locating Clockspring Screws
Courtesy of DAIMLERCHRYSLER CORP.
Install the clockspring onto the steering column. (Refer to ELECTRICAL/RESTRAINTS/CLOCKSPRING - INSTALLATION) .