LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Driver Airbag >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Airbag: Removal

  1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.

    Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.

  2. Remove speed control switch screws from steering wheel back cover, remove switches and disconnect the wires.
  3. Remove two bolts retaining Driver Airbag.
  4. Lift airbag and disconnect the two airbag initiators and horn switch wire connectors.
  5. Remove Driver Airbag from vehicle.
WARNING: WHEN REPLACING A DEPLOYED DRIVER AIRBAG, THE CLOCK SPRING MUST ALSO BE REPLACED. REFER TO REMOVAL  AND INSTALLATION . FAILURE TO DO SO COULD RESULT IN OCCUPANT PERSONAL INJURY OR DEATH.
scientia non olet · About LEMON Manuals