LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Air Bag Restraint Systems >> Seat Belt Height Adjuster >> Installation >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Belt Height Adjuster: Installation: Notes

  1. Place seat belt height adjuster into position.
  2. Install two bolts attaching seat belt height adjuster to B-pillar. Torque bolts to 40 +/- 8 N.m (29.5 +/- 6 ft. lbs.).
  3. Install upper B-pillar trim panel.
  4. Install the bolt attaching the turning loop to the height adjuster. Torque bolt to 40 +/- 8 N.m (29.5 +/- 6 ft. lbs.).
  5. Install turning loop cover and adjuster knob.
scientia non olet · About LEMON Manuals