LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Town & Country Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Installation >> 2.4L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Charging System: Generator: Installation: 2.4L

  1. Install the generator.
  2. Install the accessory drive belt, refer to COOLING for proper procedures.
  3. Connect B+ terminal to generator.
  4. Install nut holding B+ wire terminal to back of generator.
  5. Connect the push-in field wire connector to back of generator.
  6. Install the EVAP Purge solenoid to its bracket.
  7. Install the Air Box, refer to appropriate ENGINE - MECHANICAL article for more information.
  8. Connect the Inlet Air Temperature sensor.
  9. Connect battery negative cable.
scientia non olet · About LEMON Manuals