Glow Plug: Removal
WARNING: This page is about a different car, the 2006 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - BATTERY |
| 2 - PASSENGER SEAT |
- Disconnect negative battery (1) cable.
1 - ENGINE COVER RETAINING NUTS 2 - ENGINE COVER 3 - ENGINE COVER MOUNTS 4 - ENGINE COVER MOUNTING STUDS - Remove engine cover (2).
1 - GLOW PLUG ELECTRICAL CONNECTOR 2 - GLOW PLUG NOTE: Before removing glow plugs, blow off the top of the engine with compressed air. - Disconnect glow plug electrical connector (1). See Fig 3.
- Remove glow plug (2) from cylinder head. See Fig 3.