LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (5.7L Engine (Service Information)) >> Engine Mounting >> Engine Mounting - Front >> Installation >> Engine Mount
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Mount

WARNING: This page is about a different variant/trim than selected.
Fig 1: Left Hand Engine Mount Bracket
GC0015461Courtesy of CHRYSLER LLC
1 - Engine Mount Bracket
2 - Bolt
Fig 2: Right Hand Engine Mount Bracket
GC0015460Courtesy of CHRYSLER LLC
1 - Engine Mount Bracket
2 - Bolt
  1. Install the engine mount brackets (1), if removed.
    Fig 3: Engine Hydromount LH
    GC0015463Courtesy of CHRYSLER LLC
    1 - Bolt
    2 - Hydromount
    3 - Studs
    Fig 4: Engine Hydromount RH
    GC0015462Courtesy of CHRYSLER LLC
    1 - Studs
    2 - Nut
    3 - Hydromount
    4 - Studs
  2. Install hydromount (3) on the engine. Tighten hydromount to bracket fasteners.
  3. Install the studs (3,1) to the hydromount (2).
    Fig 5: Generator Support Bracket - 5.7L
    GC0015465Courtesy of CHRYSLER LLC
  4. Install the generator support bracket (1).
  5. Lower the engine.
    Fig 6: Engine Hydromount LH
    GC0015463Courtesy of CHRYSLER LLC
    1 - Bolt
    2 - Hydromount
    3 - Studs
    Fig 7: Engine Hydromount RH
    GC0015462Courtesy of CHRYSLER LLC
    1 - Studs
    2 - Nut
    3 - Hydromount
    4 - Studs
  6. Install the nuts on the studs (3,4), and tighten.
  7. Lower vehicle.
  8. Connect negative battery cable.
scientia non olet · About LEMON Manuals