LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Aspen 2WD V8-4.7L Flex Fuel >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation






INSTALLATION





1. Position the module on the HCU on ESP vehicles be careful not to damage the pressure sensor or not to touch the sensor terminals on the HCU side or the contact pads on the ABM side when installing the ABM.

2. Install the mounting screws (2) and tighten to 2.5 Nm (22 in. lbs).

3. Perform the ABS verification test with a scan tool.
scientia non olet · About LEMON Manuals