LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Aspen 4WD V8-5.7L >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Module-Front Control >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal






REMOVAL





1. Disconnect the positive and negative battery cables from the battery.

2. Partially remove the Integrated Power Module (IPM) from the engine compartment.

3. Remove the front control module retaining screws.

4. Pull the front control module straight from the IPM.
scientia non olet · About LEMON Manuals