LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Coupe >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Shields-Heat >> Installation >> Installation-Front Heat Shield
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation-Front Heat Shield

Fig 1: Removing/Installing Heat Shield Nuts
GC0032292Courtesy of CHRYSLER LLC
  1. Position the heat shield on the floor pan.
  2. Install the heat shield nuts (1). Tighten the nuts to 10 N.m (89 in. lbs.).
  3. Install the front exhaust section. See INSTALLATION .
  4. Start the engine and check for exhaust leaks.
scientia non olet · About LEMON Manuals