LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Limited, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Air Injection >> Switchover Valve >> Installation >> Installation - Switchover Valve
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation - Switchover Valve

Fig 1: Removing/Installing Switchover Valve
GC0033627Courtesy of CHRYSLER LLC
  1. Position the new gasket between intake manifold and air pump switchover valve (1).
  2. Install the retaining bolt (4). Tighten bolt to 20 N.m (177 in. lbs.).
  3. Connect the vacuum line (3).
  4. Connect the air pump switchover tube (2).
  5. Install the air cleaner housing.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals