LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Sebring Base, 2.7 R, Gas/Ethanol >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection-Diesel >> Boost Pressure Sensor >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Boost Pressure Sensor: Removal: Removal

  1. Disconnect negative battery cable.
  2. Remove the belly pan.
    Fig 1: Pedal & APPS Sensor
    GC0055506Courtesy of CHRYSLER LLC
  3. Disconnect the electrical connector (1) from the boost pressure sensor (3).
  4. Remove the 2 mounting bolts (2).
  5. Remove the boost pressure sensor (3) from the charge air tube (4).
scientia non olet · About LEMON Manuals