LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Sebring Base, 2.7 R, Gas >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection-Diesel >> Boost Pressure Sensor >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Boost Pressure Sensor: Installation: Installation

Fig 1: Pedal & APPS Sensor
GC0055506Courtesy of CHRYSLER LLC
  1. Install the boost pressure sensor (3) in the charge air tube (4).
  2. Install the 2 mounting bolts (2). Tighten to 8 N.m/6 lb. ft.
  3. Reconnect the electrical connector (1).
  4. Install the belly pan.
  5. Reconnect negative battery cable.
scientia non olet · About LEMON Manuals