LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Sebring Sedan V6-2.7L >> Repair and Diagnosis >> Lighting and Horns >> Fog/Driving Lamp >> Service and Repair >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation






LAMP UNIT





1. Place fog lamp (2) into position.

2. Connect wire connector (3) to fog lamp bulb.

3. Install fog lamp (2) to fascia.

4. Install two screws (1) attaching fog lamp (2) to front bumper fascia.

5. Install the front lower fascia closeout panel.

6. Connect battery negative cable.