LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> 300 V8-5.7L >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> System Specifications >> Torque Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Torque Specifications







TORQUE










CRANKSHAFT MAIN BEARING BOLT TORQUE SEQUENCE

Clean and oil all cap bolts. Install all cap bolts and alternately tighten in two steps using the following sequence.




- Step 1 - 27 Nm ( 20 ft. lbs.).
- Step 2 - Turn main cap bolts an additional 90°.
- Install the crossbolts with new washer/gasket. Starting with crossbolt A, tighten each crossbolt to 28 Nm ( 21 ft. lbs.).
- Repeat crossbolt tightening procedure.


CRANKSHAFT PULLEY

Crankshaft Pulley Bolt 176 Nm (129 ft. lbs.).
scientia non olet · About LEMON Manuals