LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Fuse Block >> Service and Repair >> Underhood Accessory Fuse Block >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation







INSTALLATION





1. Install the harness connectors to the underhood accessory fuse block.
2. Push the underhood accessory fuse block down into the box until the rear tabs and the front two tabs (1) connect.
3. Install the lid.
4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals