Generator - Removal

4.0L





CAUTION: Disconnect negative cable from battery before removing battery output wire from generator. Failure to do so can result in injury.

1. Disconnect and isolate negative battery cable at battery.

CAUTION: Never force a belt over a pulley rim using a screwdriver. The synthetic fiber of the belt can be damaged.

2. Remove drive belt, Accessory Drive Belt - Removal.
3. Unsnap plastic protective cover (1) from B+ mounting stud.
4. Remove B+ terminal mounting nut (2) and B+ terminal (3) at top of generator.
5. Disconnect field wire electrical connector (4) by pushing on connector tab.




6. Remove generator mounting bolts (2) and (3).
7. Remove generator (1) from vehicle.