Removal

REMOVAL





FRONT DOOR

NOTE: Secure window in the UP position before removing motor.

1. Disconnect and isolate the battery negative cable.
2. Remove the front door trim panel Front Door Trim Panel - Removal.
3. Remove the front door speaker Speaker - Removal.
4. Remove the watershield.
5. Disconnect electrical harness wire connector from the motor.
6. Remove mounting fasteners and motor.

REAR DOOR

NOTE: Secure window in the UP position before removing motor.

1. Disconnect and isolate the battery negative cable.
2. Remove the rear door trim panel Rear Door Trim Panel - Removal.
3. Remove the rear door speaker Speaker - Removal.
4. Remove the watershield.
5. Disconnect electrical harness wire connector from the motor.
6. Loosen window regulator mounting fasteners (do not remove).
7. Remove mounting fasteners and motor.