LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Sebring Base, 2D Convertible, 2.4 J >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Power Transfer Unit) >> Power Transfer Unit >> Removal >> Power Transfer Unit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Power Transfer Unit

WARNING: This page is about a different car, the 2008 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Power Transfer Unit
GC0050374Courtesy of CHRYSLER LLC
  1. Remove right halfshaft assembly. Refer to REMOVAL .
  2. Remove the exhaust from engine. Refer to REMOVAL .
  3. Remove engine cradle crossmember. Refer to REMOVAL .
  4. Remove propeller shaft assembly. Refer to REMOVAL .
  5. Remove PTU/rear mount bracket.
  6. Remove heat shield.
  7. Remove bracket and brace.
  8. Remove PTU-to-transaxle upper bolts.
  9. Remove PTU-to-bracket lower bolts.
  10. Remove PTU from vehicle.
scientia non olet · About LEMON Manuals