LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Motor >> Service and Repair >> Wiper Module - Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wiper Module - Installation







INSTALLATION





1. Connect wire connector (2) at motor.
2. Place assembly into position, install the three mounting bolts (1), Tighten bolts to 11 Nm (97 in. lbs.).
3. Install the cowl screen Installation.
4. Install the wiper arms and blades Wiper Arms - Installation.
5. Connect the battery negative remote cable.
6. If necessary, adjust wiper arms Adjustments.
scientia non olet · About LEMON Manuals