MODULE, Engine Control: Installation: Installation

WARNING: This page is about a different car, the 2010 Dodge Avenger and 2010 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 09 JC 2.0L DIESEL ECM

Courtesy of CHRYSLER LLC

Install ECM (3) on mounting bracket. Torque fastener to 10.7N.m (95 lbs. in.).
Connect both ECM electrical connectors (1).

Fig 2: AIR INLET DUCT
Courtesy of CHRYSLER LLC
Install air filter housing assembly (2). Refer to the appropriate service information.
Connect vacuum hose (1).
Connect negative battery cable.
Install air inlet tube (3).
Reprogram ECM. See Electrical/Electronic Control Modules/MODULE, Engine Control - Standard Procedure .