LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Electronic Control Modules - Electrical Diagnostics) >> Electronic Control Modules - Electrical Diagnostics >> DTC Troubleshooting >> IPM-64-Replace Module >> Diagnostic Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Test

WARNING: This page is about a different car, the 2008 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. INTERNAL IPM FAILURE 

    Connect the scan tool to the Data Link Connector.

    Turn the ignition on.

    With the scan tool, erase DTC's.

    Turn the ignition off then turn the ignition on and wait approximately 1 minute.

    With the scan tool, read DTC's.

    Did this DTC reset? 

    Yes 

    1. Replace the IPM in accordance with the service information.
    2. Perform BODY VER TEST - VER 1 .

    No 

    1. Test Complete.
scientia non olet · About LEMON Manuals