LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> 300 SRT-8 >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition Control (Service Information) >> CAPACITOR, Ignition >> Installation >> 6.1L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

CAPACITOR, Ignition: Installation: 6.1L

Fig 1: IGNITION CAPACITOR - 6.1L
GC0080072Courtesy of CHRYSLER LLC
  1. Install ignition capacitor (2) to left rear corner of intake manifold (3).
  2. Install mounting bolt.
  3. Install electrical connector (1).
  4. Connect negative battery cable and tighten nut to 5 N.m (45 in. lbs.).