LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> Aspen 2WD V8-4.7L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oxygen Sensor >> Service and Repair >> Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation






INSTALLATION

Threads of new oxygen sensors are factory coated with anti-seize compound to aid in removal. DO NOT add any additional anti-seize compound to threads of a new oxygen sensor.

1. Install O2S sensor and tighten to 30 ft. lbs. (41 Nm) torque.
2. Connect O2S sensor wire connector.
3. 4-Sensor System: If installing the right-upstream (2/1) sensor, install plastic inner fender liner, and right-front tire/wheel.
4. Lower vehicle.

scientia non olet · About LEMON Manuals