LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> Aspen 2WD V8-5.7L Hybrid >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> Transmission Range Sensor - Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Transmission Range Sensor - Installation






INSTALLATION










1. Install the park actuator rod (3) into the transmission range sensor (2).





2. Install the mainshaft roll pin (1) to the transmission case (2).





3. Position the transmission range sensor (2) into place in the transmission case.
4. Install the mainshaft (3) into the transmission case.
5. Install the transmission range sensor mounting bolt. Tighten the bolt to 8 Nm (71

NOTE: Before install the TEHCM / valve body assembly to the transmission case, be certain the existing gasket is in place.

6. Install the valve body. Valve Body - Installation.

scientia non olet · About LEMON Manuals