2.2L Diesel Engine
| 1 - FUEL RAIL |
| 2 - EGR VALVE |
| 3 - POWER STEERING PUMP |
| 4 - GENERATOR |
| 5 - COOLANT TEMPERATURE SENSOR |
| 6 - THERMOSTAT HOUSING |
| 7 - FUEL RAIL PRESSURE SENSOR |
- Disconnect negative battery cable.
- Remove engine cover. Refer to Engine - Removal .
- Partially drain coolant system below pressurized coolant recovery container. See Cooling - Standard Procedure .
- Unplug coolant temperature sensor (5) electrical connector.NOTE: Capture any residual coolant that may flow.
- Remove coolant temperature sensor (5).