LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> Sebring Base, 2D Convertible, EDG >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> HEATER, Engine Block >> Removal >> 3.5L
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

HEATER, Engine Block: Removal: 3.5L

Fig 1: Engine Block Heater - 3.5L
GC0120890Courtesy of CHRYSLER LLC
1 - BLOCK HEATER
2 - ENGINE - RIGHT SIDE
  1. Raise vehicle on hoist.
  2. Detach power cord plug from heater.
  3. Remove block heater attaching screw located below heater terminals.
  4. Remove block heater from cylinder block.