LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> Sebring Base, 4D Sedan, 2.7 D, Gas/Ethanol >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> PLUG, Glow >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

PLUG, Glow: Installation: Installation

Fig 1: Glow Plugs
GC0098506Courtesy of CHRYSLER LLC
  1. Clean glow plug bay and install glow plug.
  2. Tighten glow plugs to 10 N.m (89 lbs. in.).
  3. Connect glow plug electrical connector.
  4. Install cylinder head cover.
  5. Install engine cover.
  6. Connect negative battery cable.
scientia non olet · About LEMON Manuals