Possible Causes
| Possible Causes |
|---|
| THROTTLE PLATE STUCK ABOVE LIMP HOME POSITION |
| TP SIGNAL 1 AND TP SIGNAL 2 BOTH READ 2.5 VOLTS |
| (K124) ETC MOTOR (+) CIRCUIT SHORTED TO VOLTAGE |
| (K124) ETC MOTOR (+) CIRCUIT OPEN |
| (K126) ETC MOTOR (-) CIRCUIT OPEN |
| (K124) ETC MOTOR (+) CIRCUIT SHORTED TO GROUND |
| (K126) ETC MOTOR (-) CIRCUIT SHORTED TO GROUND |
| POWERTRAIN CONTROL MODULE (PCM) |
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See DTC-Based Diagnostics/MODULE, Powertrain Control (PCM) - Standard Procedure