Power Inverter Module - Removal
WARNING: This page is about a different car, the 2015 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Remove the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, REMOVAL AND INSTALLATION .
- Working within the storage compartment, remove the nuts (1a) and remove the power inverter module with support bracket (1b).
- Disconnect the electrical connection (2) from the power inverter module.
- Separate the power inverter module from the bracket.