LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Front Axle) >> DISCONNECT, Front Axle >> Removal >> Front Axle Disconnect
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Axle Disconnect

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle.
    Fig 1: Left Drive Axle & Intermediate Shaft
    GC0081408Courtesy of CHRYSLER LLC
    NOTE:

    The intermediate shaft is serviced only as a complete assembly.

  2. Remove left halfshaft assembly (2). Refer to Removal or Removal .
    Fig 2: Front Axle Disconnect Solenoid Harness Connector
    GC0095013Courtesy of CHRYSLER LLC
  3. Disconnect the front axle disconnect solenoid harness connector (1).
    Fig 3: Bolts From Front Axle Disconnect Solenoid
    GC0095014Courtesy of CHRYSLER LLC
  4. Remove the 3 bolts (5), (6), (7) from the front axle disconnect solenoid, and remove the front axle disconnect solenoid (8).
    Fig 4: Bolts From Front Axle Disconnect Bracket
    GC0095015Courtesy of CHRYSLER LLC
  5. Remove the 3 bolts (1), (2), (3) from the front axle disconnect bracket, and remove the front axle disconnect bracket (4).
    Fig 5: Bolts From Front Axle Disconnect Solenoid
    GC0095014Courtesy of CHRYSLER LLC
  6. Remove four bolts (1) from the front axle disconnect (3) and remove it from the engine
scientia non olet · About LEMON Manuals