LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2011 >> 300 V6-3.6L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair >> Keyless Ignition Node Receiver - Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Ignition Node Receiver - Installation





INSTALLATION





1. Push the Keyless Ignition Node (KIN) into the instrument panel until it snaps into place.
2. Reach through the Integrated Center Stack (ICS) screen opening and connect the KIN electrical connector.
3. Install the instrument cluster bezel (1) Instrument Cluster Bezel - Installation.
4. Connect the negative battery cable.

scientia non olet · About LEMON Manuals