Fuel Tank Pressure Sensor - Installation

INSTALLATION





1. The fuel tank pressure sensor seal (1) can be reused if not damaged.





2. Install the fuel tank pressure sensor (1) into the fuel tank vent tube and rotate until it locks into position.





3. Connect the fuel filler tube vent line (3) at the filler tube (4) and the fuel tank vent steel line (6).
4. Connect the fuel pressure electrical connector (1).





5. Position the rear wheelhouse splash shield (2) to the body and install the push-pins (1).
6. Install the left rear tire.

7. Lower the vehicle.




8. Connect the negative battery cable (1).